Light 'N Wire Tupperwire Store

Light 'N Wire sequencers can drive up to 10 channels

Sequencers allow multiple Lightwires to flash on and off at pre-set patterns and can be changed from
pattern to pattern. Sequencers add an exciting element of motion to your graphic design and are used for simple, spectacular, or animated effects.

Sequencers are defined by the number of channels (Lightwire outputs) and the length of Lightwire per channel that it can illuminate. We offer sequencers with 3, 5 or 10 channel, which can be applied as a lighting effect to sculpture, costumes, hats, theater sets, signage, and art car applications.

SHOP FOR SEQUENCERS:

POCKET SEQUENCER

INDUSTRIAL SEQUENCERS

POWER SOURCE ACCESSORIES

3-CHANNEL UNIT

SQ-3C01

2.2" x 3.4 " x .8"

$25.00

The 3-Channel Unit has an on/off switch and offers up to 8 patterns in slow or fast modes, which are controlled by a pattern changing switch.

Powers up 5 feet of Lightwire per channel. Housed in plastic case.

Note: Uses 4 AAA batteries or 6V AC Adapter (PS-WP01)*. (It has an external input to change to
optional AC adapter.)

5-CHANNEL UNIT

SQ-5C01

2.2" x 3.4 " x .8"

$35.00

The 5-Channel Unit has an on/off switch and offers up to 8 patterns in slow or fast modes, which are controlled by a pattern changing switch.

Powers 5 feet of Lightwire per channel. Housed in plastic case.

Note: Uses 4 AAA batteries or 6V AC Adapter (see Power Source Accessories below) #PS-WP01.
(It has an external input to change to optional AC adapter.)

10-CHANNEL UNIT

SQ-XC01

2.5" x 1.75" x 4.5"

$75.00

The 10-Channel Unit has an on/off switch and variable speed control. It has a limited built-in custom programming feature, as well as a pattern mode switch. The unit can sense how many channels your are using (2 to 10) and automatically sequence into a wide variety of patterns.

Powers from 1 to 40 feet of Lightwire per channel.

Note: Uses 9V DC or 12V DC Battery Brick (see Power Source Accessories below) #PS-BB01.

6V AC WALL PLUG

PS-WP01

$6.00

The 6V AC Wallplug is an alternate power source for 3- and 5-Channel sequencers above.

Note: Uses AC wall plug.

12V DC BATTERY BRICK

PS-BB01

$2.00

The 12V DC Battery Brick is an alternate power source for 10-channel sequencers.

Note: Uses 8 AA batteries (not supplied).

Yvonne Sartain Media Designs