PIPSQUEAK DRIVER

CB-PP01

$6.00

When size matters and smaller is preferred for lightweight applications (such as lighting up masks, hats, or jewelry), the Pipsqueak is it.

Powers up 4 to 45 feet of Lightwire.

Note: Has a 9-volt battery connection for either a 9V battery or a 12V battery brick*.

STANDARD DRIVER

CB-SD01

1.5" x 1.5" x 2.5"

$8.00

The Standard Driver has two illumination modes: continuous brightness and blink. To change the cube from its continuous blinking mode to an always on illuminated state: cut the white wire and add an on/off switch between the two pieces to control the blink or no-blink state.

Powers 2 to 45 feet of Lightwire.

Note: Has a 9-volt battery connection for either a 9V battery or a 12V battery brick*.

BIG BOY DRIVER

CB-BB01

1.75" x 1.25" x 2.5"

$18.00

The Big Boy Driver is a mid-range driver capable of powering between 50 to 165 feet of Lightwire at full brightness. Includes ON/OFF switch.

Powers 50 to 165 feet of Lightwire.

Note: Has a 9-volt battery connection for either a 9V battery or a 12V battery brick*.
        Also has an AC adapter to power the driver off of a 12V AC wall plug.**

LONG RANGE DRIVER

CB-LR01

2.5" x 1.75" x 4.5"

$110.00

The Long Range Driver is our most powerful cube driver and can power up to 330 feet of Lightwire at full brightness.

Powers up to 330 feet of Lightwire.

Note: Comes with 12V DC input wires. Can be used with our 12V DC battery pack below.*

*12V DC BATTERY BRICK

PS-BB01

$2.00

The 12V DC Battery Brick is an alternate power source for many of our cube drivers.

Note: Uses 8 AA batteries.

**12V AC WALL PLUG

PS-WP02

$12.00

The 12V AC Wallplug is an alternate power source for the Big Boy Driver (CB-BB01) and the Long Range (CB-LR01) drivers.

Note: Uses 12V AC wall plug.