Artist technology resource for electroluminescent light wire and other light sources
Because a Lightwire project is a "system of parts" of Lightwire and a driver or sequencer, the accessories are the stuff that make up the integral parts of making it light up. It is within this little collection of extras that provides the tools to cut, connect and charge up your Lightwire project with battery or wall current to bring it to life and light.
SHOP FOR ACCESSORIES:
Battery Bricks
*12V DC BATTERY BRICK
PS-BB01
$2.00
The 12V DC Battery Brick is an alternate power source for many of our cube drivers.
Note: Uses 8 AA batteries.
Wall Plugs
**12V AC WALL PLUG
PS-WP02
$12.00
The 12V AC Wallplug is an alternate power source for the Big Boy Driver (CB-BB01) and the Long Range (CB-LR01) drivers.
Note: Uses 12V AC wall plug.
6V AC WALL PLUG
PS-WP01
$6.00
The 6V AC Wallplug is an alternate power source for 3- and 5-Channel sequencers above.
Note: Uses AC wall plug.
12V AC ADAPTER
PS-AD01
$8.00
Use the 12V AC Adapter for standard cube drive, pipsqueak driver, little strobing driver and sound activated driver.
Note: Uses AC wall plug.
DRIVER SIDE CONNECTOR
SNR-DSC01
$.50/ea
The Driver Side Connector allows Lightwire to be swapped out with the same length of a different color as needed.
Note: Solders to driver side.
LIGHTWIRE SIDE CONNECTOR
SNR-LSC02
$.50/ea
The Lightwire Side Connector allows Lightwire to be swapped out with the same length of a different color as needed.
Note: Solders to wire side.
Y SPLITTER
SNR-YS03
$1.50/ea
The Y Splitter is used to attach two different colored Lightwires to the same driver.
Note: Attaches on the driver side for dual color use.
QUAD CONNECTOR
SNR-QD01
$2.25
The Quad Connector can attach four strands of lightwire to a single driver.
Note: Invaluable helper!
